Description Of The Error Message System - OHAUS Frontier FC5714 Manual De Instrucciones

TM
Frontier Centrifuge FC5714/FC5718/FC5718R/FC5816/FC5816R
For 5714
Please proceed as follows (see Figure xx):
ATTENTION:
• Switch the centrifuge off and unplug the power cord, wait until the rotor stands still (this may take
several minutes)
At the right side of the centrifuge there is a plastic stopper (Figure 38). Remove this stopper, which
is connected to the lid lock, horizontally from the housing until the centrifuge lid opens.
•Now open the lid of the centrifuge

6.2.2 Description of the error message system

The error message "error" (M11) is shown in the "Time/Prog" (A-3) display (See figure 39). Detailed information
about possible error messages are in "table 6: error messages" (See Appendix).
Figure. 37
Figure. 38
M11
Figure. 39
A-3
EN-20