Descargar Imprimir esta página

Velux integra KLC 500 Manual De Instrucciones página 4

Ocultar thumbs Ver también para integra KLC 500:

Publicidad

english:
important inFormation
Warning – to reduce the
risk oF severe injury or
death:
safety
• Read instructions carefully before installing and operating.
• Please keep instructions for future reference and hand them over to any new
user.
• This device is intended for use by persons with the relative experience and
knowledge and who have been given instruction concerning use of the device
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the device.
• Never let children play with the control unit or the remote control. The remote
control should be kept out of reach of children at a minimum height of 5 feet
(1.5 m).
• The product must not be put into operation until it has been fitted according
to these instructions.
• Before operating, ensure that the product can be operated without risk of
damage to property or injury to people or animals.
• If repair and adjustment work is needed, disconnect from the main power sup-
ply and ensure that it cannot be reconnected unintentionally.
• The control unit must not be covered (maximum casing temperature:
104°F/40°C).
• This product has been designed for use with genuine VELUX products. Con-
nection to or use with other products may cause damage, malfunction or
injury.
• The control unit has a Class 2 Low Voltage output (19-24 V d.c.).
• To reduce the risk of electric shock, this device has a polarized plug (one pin
is wider than the other). The plug will fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. Do not change
the plug in any way.
• Disconnect from the main power supply before carrying out any maintenance,
repair, adjustment or service work to the skylight or products connected to it
(including control unit and, if installed, battery backup KLB) and ensure that it
cannot be reconnected unintentionally during this time.
• The product requires a minimal amount of maintenance. The surface may be
cleaned with a soft, damp cloth using a small amount of household cleaner
diluted in water.
• If main power supply cable is damaged, it must be replaced by qualified
electrical installer in accordance with all local codes, ordinances, rules and
regulations.
• FCC ID: XSG863892 and IC ID: 8642A-863892: control unit
Certificate of Radio Equipment in Japan: No. 10215037/AA/00
This device complies with part 15 of the FCC and RSS-210 of the IC rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
4 VELUX

Publicidad

loading