General Points; Safety Information; Intended Use - mbas Discman 4 Manual De Instrucciones

2 General points

2.1 Safety information

Please read these operating instructions and, in particular, the safety instructions carefully before using
the Discman 4 / Discman free!
Only operate the device using the battery or the NG 20 power supply unit supplied with the device.

Only use the device in closed interior rooms!

Never cover the ventilation grilles during grinding!

Do not operate the device near flammable materials.

Do not touch rotating parts during operation!

Always wear suitable work clothes when operating the device:

close-fitting upper clothing

protective gloves made from suitable material

protective goggles

dust protection for the nose and mouth

wear a hair net if appropriate

Make sure the room is well ventilated.

Protect the device against moisture and rain!

Keep the device out of the reach of children!

The device may be operated only with all safeguards and covers attached.

Disconnect the device from the power supply

if it is not in use.

before maintenance work.

when replacing accessories such as the grinding disc.

If the device is damaged, have it repaired by an approved customer service point only!

Replace damaged grinding discs immediately!

The device must only be used with original MBAS spare parts/consumables. Any use of foreign material shall be at

the risk of the operator and will invalidate the warranty for the device.
The device corresponds to operating mode S 2 and has an operating ratio of 60%. In other words, after 6 minutes of

grinding, you must switch off the device for 4 minutes.

2.2 Intended use

The device must only be used for grinding the side and base edges of skis or snowboards.
Failure to follow these instructions releases MBAS from any and all liability for damage incurred.
Discman 2
Makita: 883853E985 / 884614B998
25
25