Before Operation - Aiwa AV-DV95 Manual De Instrucciones

BEFORE OPERATION
TAPE MONITOR
POWER I Function indicators
MANUAL
SELECT
UP
I
Eco
I
UP
MULTI JOG
\_J
PHONES SURROUND
FRONT SPEAKERS A,B
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. The VOL (volume) level
or function name is displayed one after the other for the first four
seconds.
The selected function indicator lights up in red and the others in
green.
To change the brightness level of the display
1 Press ECO so that "ECO MODE is displayed.
2 Within 4 seconds, turn the MULTI JOG to display DIM MODE,
and then press the ENTER button within 4 seconds.
3 Within 4 seconds, turn the MULTI JOG to select the dimmer
mode as below,
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
r
DIM OFF - DIMMER 1+ DIMMER 2- DIMMER 3
7
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1.
DIMMER 3: The illumination of the display is dimmer than
DIMMER 2. The function indicators turn off.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (06,3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS
A and B buttons to &OFF. Otherwise sound is output from the
speakers.
When the headphones are plugged in:
- The Dolby Pro Logic or DSP system is automatically canceled
- The Dolby Digital surround mode or the DTS surround mode is
changed to the "2chSTERE0 (2CH DOWNMIX)" mode
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button
to ~ON.
To use speaker system B: Set the FRONT SPEAKERS B button
to ~ON.
To use both speaker systems: Set both the buttons to = ON.
Set the button(s) to KOFF to turn off the speaker system(s).
As the front speaker systems A and B are connected in series:
- The sound will decrease slightly when using both speaker
systems
- No sound can be heard if the FRONT SPEAKERS A and B
buttons are set to wON when only one speaker system is
connected
When not connecting a sub woofer
Be sure to select the "SUBW OFF mode.
After pressing the SURROUND button to turn on the Dolby
Pro Logic, press the MANUAL SELECT button on the remote
control once so that "SUBW ON" appears on the display. Then
press the UP button or turn the MULTI JOG within four
seconds to display "SUBW OFF."
To turn the unit off, press the POWER button.
POWER ECONOMIZING (ECO) MODE
1
23
~ PowER &TANDBY/ON indicator
Setting this unit to the ECO mode reduces power consumption
as below.
Initial setting of the ECO mode is ON.
When the current time is set, the clock display disappears
immediately.
While the power is off, all the display lights turn off, and only
the POWER& 3TANDBY/ON indicator lights in red.
To cancel the ECO mode
1
2
3
Press the ECO button to display ECO MODE while the unit is
turned on.
Within 4 seconds, press the ENTER button.
Within 4 seconds, turn the MULTI JOG to select ECO OFF,
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
7
ENGLISH