Programming - socomec Countis ATd Instrucciones De Servicio

PROGRAMMING

NB:
Programming quits automatically if no
key is pressed after a 25-second
interval.
14
KEYS
+
+
INSTRUCTIONS
Press for approx. 3 seconds to access
programming mode password
To enter code 167
To confirm code and access network
type programming
To select 3-4 nbL network type
(unbalanced three-phase), 3-4 bL
(balanced three-phase with 1 CT), 1 bL
(single-phase) and 2 bL (two-phase
with 1 CT)
To confirm network type and proceed
to impulse duration setting (PLS)
To select pulse duration from set list
(60, 100, 200, 300, 400, 500, 600,
700, 800 and 900 ms)
To set duration and proceed to partial
meter reset (rSEt)
To select 'rSEt nO' (no reset to zero)
and 'rSEt YES' (reset to zero)
To confirm reset to zero and return to
network type programming
To quit programming.
SOCOMEC - Réf. : 875 452A