Spraying - Annovi Reverberi CAR 50 Manual De Uso

Revision: 06
7. Check the motor oil and fuel level (for pumps with IC motors) (55). For more details about checking the IC
motor and its safety, refer to the motor's instruction manual, which is included with this document.
52
6

SPRAYING

Before starting the device, review the instructions in this manual and the trolley documentation. It is es-
sential that you understand the operation of all parts of the trolley if you are to avoid accidents.
Before starting the treatment, make sure you are wearing the necessary individual safety equipment: over-
alls, gloves, boots, face mask with filter, etc.
Only competent persons should use the trolley for spraying. Do not allow children, untrained or incapable
persons to use the trolley.
Pull the cord (IC motor) or turn the switch (53) (electric motor). Move the pressure/bypass selector (46) to
the pressure setting. Now turn the pressure regulator knob (47) clockwise to the desired pressure setting.
You can check the pressure on the pressure gauge (48) (if fitted).
53
Annovi Reverberi S.p.A. Via Martin Luther King, 3 - 41122 Modena - Italy
55
47
46
EN
EN
53