Dremel 3D40 FLEX Instrucciones De Funcionamiento Y Seguridad página 17

DM 2610039151 10-18.qxp_3D40 10/8/18 10:34 AM Page 17
The first time you power on your Dremel
3D40 you will be prompted to setup your
printer, connect to a network, update your
firmware and create an online account.
Completing this process will give you access
to features such as printing wirelessly, printer
sharing amongst your friends and family,
notifications of firmware updates, and printer
status monitoring. You will then be walked
through how to loading your first roll of
filament and how to properly level the build
plate.
1. Select your country and your language.
2. To complete initial setup, tap "Yes" when
prompted on the initial setup screen. If you
decline this setup you can always setup
network and register later.
3. If you choose
automatically connect to your ethernet (if
plugged into router skip to step 5) or
search for available wireless networks.
4. Choose your wireless network using the
touch screen. Use the arrows to scroll
through the list of available wireless
Initial Setup
"Yes", 3D40 will
17
networks. When your wireless network
name is highlighted, tap "Accept".
5. Enter your wireless network password and
tap "Accept".
6. Tap "Yes" to update your firmware (if a
firmware update is available) to get the
latest features and improvements.
7. Tap "Done" to complete the initial setup
process on your printer.
8. Visit digilab.dremel.com/getstarted and
follow the prompts to complete your user
profile creation and 3D40 registration.