Sleep Timer Operation; Off-Timer Operation - Mitsubishi Heavy Industries SRK63ZK-S Manual Del Propietário

SLEEP TIMER operation

The unit stops automatically after the set time lapses.
The set temperature is automatically adjusted according to the elapsed time in order to avoid too much cooling or heating.
Changing of set time
Set a new time by pressing SLEEP button.
How to cancel
Press the CANCEL button to turn off the SLEEP
indicator.

OFF-TIMER operation

The unit stops automatically when the set time comes.
With the air conditioner turned off, start the operation from Step 1. With the air conditioner running, start from Step 2.
Changing of set time
Set a new time by using the OFF-TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.
1
Press the SLEEP button.
If it is pressed while the unit is off
SLEEP TIMER operation starts with the previous operation settings, and the air
conditioning is turned off after the set time elapses.
If it is pressed while the unit is running
The air conditioner is turned off after the set time elapses.
Every time the button is pressed, the display changes as follows:
Example: You prefer it to stop after 7 hours.
Set to
1
The timer light (yellow) is on.
• The unit stops after the set time lapses.
NOTE
• SLEEP operation will not function during ALLERGEN CLEAR operation.
• Cannot be set at the same time with OFF-TIMER.
Example: You prefer it to stop 22:30.
1
Press the ON/OFF button.
2
Press the OFF-TIMER button.
OFF TIMER display
3
Press the "
Every time the
Every time the
Set at 22:30.
4
Press the OFF-TIMER button.
The display changes from blinking to steady lighting and the setting is
complete.
The timer light (yellow) is on.
NOTE
• The unit stops at the end of the set period of time.
• Make sure to press the button within 60 seconds from the last operation in step
3, otherwise the setting is not completed.
• The current time is not displayed during OFF-TIMER operation.
• OFF-TIMER operation will not function during ALLERGEN CLEAR operation.
• Different from SLEEP TIMER operation, automatic set temperature adjustment
is not done during OFF-TIMER operation.
– 11 –
No indication
(cancelled)
h
is blinking.
or " button.
button is pressed, the display is switched in the order of:
...
0:00 0:10 0:20 1:00
button is pressed, the display is switched in the order of:
...
0:00 23:50 23:40 23:00
Page 13
... (Units of one hour)
1:10 (Units of ten minutes)
22:50 (Units of ten minutes)