Moser 1884 Instrucciones De Uso página 5

ENGLISH
Description of parts
de
A Blade set
B On/off switch with LED display
en
C Battery power indicator
D Oil and cleaning indicator
E Appliance socket
fr
F Charging stand
G Charging stand socket
it
H Cable compartment
I Attachment comb, cutting length 3 mm
es
J Attachment comb, cutting length 6 mm
K Attachment comb, cutting length 9 mm
L Attachment comb, cutting length 12 mm
pt
M Attachment comb, cutting length 18 mm
N Attachment comb, cutting length 25 mm
nl
O Oil for blade set
P Cleaning brush
sv
Q Plug-in transformer
R Appliance plug
no
Important safety information
For your own protection from injuries and electric shocks, the following information must be
fi
observed when using electrical equipment:
Read all the instructions before using the appliance!
tr
· Only use hair clippers to cut human hair.
· Only connect the equipment to an AC mains supply. Note the rated voltage on the rating
pl
plate!
· Never touch electrical equipment that has fallen into water. Disconnect from the mains
cs
immediately.
· Never use electrical equipment in the bath or shower.
· Always position or store electrical equipment where it cannot fall into water (e.g. wash basin).
sk
Avoid electrical equipment being exposed to water and other liquids.
· Always disconnect the appliance from the power supply immediately after use except when
sl
charging.
· Disconnect the appliance from the power supply before cleaning.
ro
· This appliance is not suitable for use by people (including children) with physical, sensory or
mental disabilities or who do not have the relevant experience or knowledge of using such
bg appliance unless under the supervision of or after having received instruction in the use of
the appliance by an individual who is responsible for their safety. Children should be super-
vised to ensure they do not play with the appliance.
ru
· Only use the appliance for the proper purpose as described in the operating instructions.
Only use accessories recommended by the manufacturer.
uk
· Never use the appliance if the mains cable or plug-in transformer is damaged. In addition, do
not use the appliance if it is not working correctly, if it is damaged or if it has fallen into water.
el
In these cases, send the appliance to our Service Centre to be inspected and repaired. Only
specialists properly trained in the handling of electrotechnical devices may repair electrical
equipment.
ar
10
· Do not hold the appliance by the mains cable to carry it and do not use the cable as a
handle.
· Keep the appliance away from hot surfaces.
· Make sure that the mains cable is not twisted or kinked during charging or storing.
· Never insert or allow objects to fall into the openings of the appliance.
· Only use and store the appliance in dry rooms.
· Never use the appliance where aerosol (spray) products are being used or where oxygen is
released.
· To protect against injuries, never use the appliance if the blade set is damaged.
· Do not use disposable batteries. Rechargeable battery units can only be obtained from
authorized Service Centres.
· The appliance is safety insulated and radio screened. It meets the requirements of EU
Directive 2004/108/EC regarding electromagnetic compatibility and EC Low Voltage Directive
2006/95/EC.
Exhausted batteries/rechargeable batteries should not be disposed of in household
waste. Dispose of them in accordance with legal regulations.
Mains operation
· Connect the appliance plug (R) on the plug-in transformer to the appliance socket (E)
(Fig 1a).
· Connect the plug-in transformer to the mains power supply (Fig 1b).
· Using the on/off switch, switch off the appliance after use (Fig. 2).
Charging the battery
· Connect the appliance plug (R) on the plug-in transformer to the charging stand socket (G)
(Fig 3a). The appliance can also be connected directly to the plug-in transformer for charg-
ing. (Fig. 1a/b).
· Connect the plug-in transformer into the socket (Fig 3b).
· Switch off the appliance using the on/off switch (Fig. 2).
· Place appliance in the charging stand or connect directly to the plug-in transformer.
(Fig. 1a/b).
· During the charging operation, the LED on the on/off switch flashes green. The charge sta-
tus of the battery is displayed by the battery power indicator (C). When the battery is fully
charged, all segments on the capacity display (C) and the LEDs on the on/off switch are lit
continuously. After the device has been removed from the charging stand, the display goes
out after approx. 15 seconds. (power saving mode)
· Recommendation: To assure the precision of the capacity indicator (C), the battery should
not be recharged again until its power has been completely drained, i.e. until it is 'flat'.
· It will take no more than 45 minutes for the appliance to charge to full capacity.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
sl
ro
bg
ru
uk
el
ar
11