CLEANING THE CAPSULE AND THE DROP
COLLECTING DRAWERS
The used capsule collecting tray must be emptied every
time the machine requires so or every 2-3 days at the
most.
Regularly verify that the used capsule collecting drawer
and the drop collecting drawer will not be full, to avoid
machine malfunctions and damage.
Both the power-on / supply
start blinking quickly to a white light to indicate that
the pod collecting tray is full.
Pull the used capsule tray out together with the drop
collecting drawer.
Remove and empty the capsule collection tray.
MAINTENANCE AND CLEANING
buttons will
Water
discharge tray
Drop
collecting drawer
31
Remove the cup support grid, take off and empty the
drop collection tray and the water discharge tray.
Wash all the components with warm water.
The following components can be washed by using a
dishwasher: used capsule collecting tray, cup support-
ing grid, drop collecting tray and water tank.
Both the water discharge tray and the tank cover CAN-
NOT be washed by using a dishwasher.
Dry off all the components before fitting them back
into place.
Fit the drop collecting tray (complete with all its
parts) back into place on the machine.
EN
Used capsule
collection tray
Cup support
grid