Disposal - Trodat DRYTEQ SET Manual De Uso

Possible
Defect
cause
No electrical
power
Device was inac-
tive for too long
Device does
(energy-saving
not charge
mode)
Charging
temperature
not permitted
- 0°C > 40°C
UV LEDs are
dirty
Distance bet-
ween UV LEDs
Ink does and ink is too
not harden great
Exposure time
was not long
enough The
exposure unit
was lifted off
too fast
No ink cartridge
inserted into the
stamp
No impression
possible
Ink cartridge
dried up
Solution
Check the
charging
device
Device will still
be charged Turn
the device off
Charge the
device in the
permitted tem-
perature range
Carefully clean
the UV LEDs
with a
soft cloth
Lessen the
distance Set
the UV exposure
unit to cure
above the stamp
impression
During
exposure, wait
until the blue
status indicator
lights up
Insert the ink
cartridge into
the stamp
Replace the ink
cartridge
18
EN

9 Disposal

Do not dispose of stamps and ink
cartridges as household waste!
Dispose of unused stamps and ink
cartridges that contain organic solvents
or other hazardous substances as waste
ink and varnish. AVV no. 080111 or 080312,
observe the local and national instructions
for disposal.
Do not dispose of the UV curing unit
as household waste!
Dispose of the unit at an official recycling
centre.
Do not dispose of batteries and chargers
as household waste!
19
EN