Ink Cartridge; Technical Data; Initial Start Up; Check The Device And Delivered Accessories - Trodat DRYTEQ SET Manual De Uso

3.3.4 Ink cartridge

Prevent contamination
Remove the cartridge cover from the ink
cartridge only when inserting it directly
into the dryteq stamp. Watch for any ink
residue on the underside of the cartridge
cover and the upper edges.
Prevent damage
Use only original Trodat dryteq ink
cartridges for the dryteq stamp.
• Only cure the ink with a dryteq
UV curing unit.
• Never refill Trodat dryteq ink cartridges
with other stamp inks.
• Never mix different colours of dryteq inks.
Caution
Skin and eye burns with improper handling
of the stamp, ink cartridge and ink
• Never touch the ink cartridge surface.
The ink can cause skin irritation and
allergic reactions.
• Never touch uncured dryteq ink under
any circumstances.
• Never use the Trodat dryteq stamp on
people, animals, food or alcohol and
tobacco products.
4 Technische

4 Technical data

Description
Model: Product:
dryteq set
Supply
Input voltage
Protection class
Storage temperature
Permissible operating
temperature

5 Initial start up

5.1 Check the device and delivered accessories

1. Take the device and the accessories out of the
packaging.
2. Check whether the delivery is complete.
3. Check whether the device or its accessories are
damaged. If there is any damage, do not use the
device. Contact the manufacturer using the
indicated service address.
Note
Fully charge the dryteq
UV curing unit's battery.
Use the cable with the USB-C interface. Charge
the dryteq UV lamp with a USB charger (charging
current at least 500 mA) or PC (USB 2 or
USB 3 interface).
10
EN
Dimensions
Trodat stamp, 3 ink
cartridges, dryteq blk
25 x 20 mm v1.0
Lithium-ion polymer
battery
5V
IP10
-20°C to +40°C
0°C to 40°C

5.2 Prior to start up

11
EN