Stamp - Trodat DRYTEQ SET Manual De Uso

Warning
Risk of injury to the eyes due to UV light
if the curing unit is handled improperly
• Never look directly at the LED light.
• Never shine it into the eyes of other
persons or living beings.
• Avoid touching the 4 UV LEDs in the
reflector on the placement area.
Warning
Risk of corrosive injury due to leaking
battery fluid
• Never open the battery.
• Avoid contact with skin, eyes and
mucous membranes.
• Upon contact, rinse the affected areas
immediately with plenty of water and
seek immediate medical attention.
Risk of explosion
Improper handling of the battery may
cause an explosion
• Never use the device in areas where
there is a risk of fire or explosion.
• Never disassemble the UV curing unit
and the battery.
• Never short-circuit the battery.
• Keep the device away from fire.
Fire hazard
A burning device can release harmful
emissions. Parts of the device become
warm during use. Therefore, improper
handling of the device may cause a fire.
• Do not use the device on flammable
materials.
• Never cover the device or its accessories
with objects.
• Never expose the device to high
temperatures or extreme weather
conditions.
• Keep the device away from hot surfaces.
• Extinguish a fire with a powder
extinguisher, sand or dirt and call
the fire department.
Electricity warning
Possible electric shock due to improper
use, faulty electronic components or
excessive voltage.
• Turn off the device when not in use.
• Connect the curing unit to an easily
accessible power source.
• Keep the devices away from water or
other liquids.
• Never touch an electrical appliance if it
has fallen into water.
• Always pull plugs out of the charging
socket by the plug handles.
• Never use the cable as a carrying handle.
• If the device was not used for three
months, fully charge the battery.
Caution
Injuries to the skin due to mechanical
damage to the plastic parts
• Only use the device and its accessories
if they are in perfect condition.
• Do not open the device or make any
changes to the device.
• Protect the device from strong shocks.

3.3.3 Stamp

Caution
Skin injuries and pinching of the fingers
• Do not disassemble the stamp and do not
make any changes.
• Protect the device from strong shocks.
• Never expose the device to high
temperatures or extreme weather
conditions.
8
EN
9
EN