Setup And Operating Procedures; Inserting The Batteries; Clock And Date Adjustment - Profi Care PC-BMG 3018 Manual De Instrucciones

Setup and Operating Procedures

1. Inserting the Batteries

a. Open battery cover at the back of the monitor.
b. Insert 2 batteries of the type "AAA". Please pay attention to
polarity.
c. Close the battery cover.
When the LCD shows the battery symbol
ies with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month
or more to avoid relevant damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it should get
in your eyes, immediately rinse with plenty of clean water and
contact a physician.
The monitor, the batteries and the cuff, must be disposed of
according to local regulations at the end of their usage.

2. Clock and Date Adjustment

a. Once you install the battery or turn off the monitor, it will enter
Clock Mode, and LCD will display time and date by turns.
See Fig. 2-1 & 2-2.
b. While the monitor is in Clock Mode, pressing the "START"
button and the "MEM" button simultaneously; a beep is heard
and the month will flash first. See Fig. 2-3. Press the button
"START" repeatedly; the day, the hour and the minute will
flash in turn. While a number is flashing, press the button
154
PC-BMG 3018_IM_new
, replace all batter-
08.07.19