Connecting The Cuff To The Monitor - Profi Care PC-BMG 3018 Manual De Instrucciones

"MEM" to increase the number. Hold the button "MEM"
depressed, the number will increase rapidly.
Fig. 2- 1
c. You can turn off the monitor by pressing the "START" button
when the minutes are flashing, then the time and the date
are confirmed.
d. The monitor will turn off automatically after 1 minute of no
operation; with the time and date unchanged.
e. After replacing the batteries, you should set the time and the
date again.

3. Connecting the Cuff to the Monitor

The cuff is attached to the monitor when it is packaged. Should
the cuff become unattached, align the two plugs and four brack-
ets of the cuff with the plug sockets
and bracket sockets of the monitor
and press the cuff to the monitor until
the plugs and brackets are securely
attached.
PC-BMG 3018_IM_new
Fig. 2-2 Fig. 2-3
155
08.07.19