Removing Clogged Debris From The Impeller; Double-Insulated Appliances - Toro Ultra 350 Manual Del Operador

Removing Clogged Debris from the
Impeller
1. Turn off and unplug the vacuum from the power
source and wait for all moving parts to stop.
2.
m–5124
3.
4. Check the impeller for any signs of damage. If it
is damaged, contact your Authorized Toro Dealer.
5. Install the vacuum tube or, if you want to switch to
blower mode, the bottom inlet cover. Refer to
Converting from Blower to Vacuum or Converting
from Vacuum to Blower for more information.
8
Storage
Store the blower/vacuum and extension cord indoors,
in a cool dry location, out of reach of children and
animals.
Troubleshooting
If your blower fails to run when you turn it on, consult
the following list before contacting your Authorized
Toro Dealer:
Ensure that the bottom inlet cover or vacuum
tube is locked in place.
Ensure that the power cord is secured in place on
the back of the blower and that the plug is fully
seated.
Service
Toro has designed this product to give you years of
trouble free use. Should it need service, bring the
product to your Authorized Toro Service Dealer. Your
Toro Dealer is specially trained to repair Toro products
and will ensure that your Toro stays "All" Toro.
Double-insulated
Appliances
In a double-insulated appliance, two systems of
insulation are provided instead of grounding. No
grounding means is provided on a double-insulated
appliance, nor should a means for grounding be
m–5512
added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of
the system, and should be done only by the qualified
service personnel at your Authorized Toro Service
Dealer. Replacement parts for a double-insulated
appliance must be identical to the parts they replace.
A double-insulated appliance is marked with the
words "Double Insulation" or "Double Insulated." The
symbol (square within a square)
marked on the appliance.
3325-441
may also be