This can be changed to VU (-20dBFS Ref), VU (-18dBFS Ref), PPM EBU (-20dBFS Ref),
PPM EBU (-18dBFS Ref), PPM BBC (-20dBFS Ref), PPM BBC (-18dBFS Ref), Loudness (EBU +9
scale) or Loudness (EBU +18 scale)
↵
AUDIO METER:
↵
Meter Mode: Loudness (EBU +18 scale)
↵
The response will be
ACK:
AUDIO METER:
Meter Mode: Loudness (EBU +18 scale)
The next block is the input type.
AUDIO INPUT:
Routing: Speaker Stereo SDI Stereo 1-2
This can be changed to SDI Stereo 3-4, SDI Stereo 5-6, SDI Stereo 7-8, SDI Stereo 9-10, SDI
Stereo 11-12, SDI Stereo 13-14, SDI Stereo 15-16, XLR AES/EBU Stereo 1-2, XLR Analog Stereo or
RCA Stereo
↵
AUDIO INPUT:
↵
Routing: Speaker Stereo XLR AES/EBU Stereo 1-2
↵
The response will be
ACK:
AUDIO INPUT:
Routing: Speaker Stereo XLR AES/EBU Stereo 1-2
The next block is the audio output state. This indicates the current headphone and speaker
volume settings as well as the state of the mute and solo buttons.
AUDIO OUTPUT:
Gain: Speaker Stereo 0
Gain: Headphone Stereo 0
Mute: false
Solo: Off
The volume gain settings can be set between 0 and 255. Mute can be true or false and Solo
can be Off, Left or Right
↵
AUDIO OUTPUT:
↵
Gain: Speaker Stereo 125
↵
Solo: Right
↵
The response will be
ACK:
AUDIO OUTPUT:
Gain: Speaker Stereo 125
Solo: Right
Yazılım Geliştirici Bilgileri
238