Standard Components; Time Setting; Alarm Setting - HumanTechnik time flash Instrucciones De Servicio

We would like to congratulate you on
the purchase of our time fl sh and
hope that it will serve you well for a
long time to come. You have chosen a
modern and reliable system. Please
read the operating instruction through
carefully to be able to start the unit
correctly and to familiarize yourself
with all of the system features.
The time fl sh is an electronic clock
with an analogue time display. It
wakes you up with a flashing light
and/or an acoustic alarm.
The following special accessories
can be connected to the alarm clock:
- Vibrating pillow
- Flash module
- Switch module
- Acoustic module

Standard components

Please check if all following compo-
nents are included:
- time fl sh
- 230 V mains lead
- Operating instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Startup
Connect the supplied mains lead to
the socket on the alarm clock and
plug it into a 230 V power outlet.

Time setting

Carefully pull out the button for setting
the clock/alarm time and, with the but-
ton pulled out, turn it in the direction of
the arrow until the desired time is set.
Note: Please do not use excessive
force when pulling out the button for
setting the clock/alarm time!

Alarm setting

Turn the button for setting the
clock/alarm time in the direction of
the arrow until the required alarm
time is set.
Switching on the alarm
Switch on the alarm using the
ON/OFF switch.
Switch not pressed: alarm switched
on (green outline visible around
switch).
Switch pressed:alarm switched off.
Switching on the audible alarm
Switch on the audible alarm using the
audible alarm ON/OFF switch.
Switch not pressed: Audible alarm
switched on (green outline visible
around switch).
Switch pressed: Audible alarm swit-
ched off.
Snooze Alarm
Press the Light/Snooze button to sus-
pend a alarm which is in progress.
The alarm is triggered again after
about 5 minutes.
English 7