Listening To The Satellite Radio - JVC KD-A925BT Manual De Instrucciones

<Auto>: Switches between digital and
analog audio automatically.
• In the case when the radio station
forces the reception mode to digital
or analog,
lights up.
<Analog / Digital>: Tuning to digital
audio or analog audio only.
• indicator lights up when holding
the digital reception; flashes when
holding the analog reception.
The setting automatically return to <Auto>
when you tune in to another broadcast or if
you turn off the power.

Listening to the satellite radio

Before operating, connect either one of the following systems (not supplied) to the expansion port
on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SCC1 and KS-SRA100
• D&P, SCVDOC1 and KS-SRA100
For details, refer also to the instructions supplied with the other components.
~
] "SIRIUS" or "XM"
Ÿ
] Select a category.
SIRIUS: If you select "ALL," you can tune
in to all the channels of all categories.
Channel Updates (SIRIUS)
• If channels are updated after subscription, updating starts automatically. "UPDATING" appears and
no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
or indicator
!
Using the remote controller
5 / ∞ : [Press] Changes the preset stations/
channels.
[Hold] Searches for HD Radio stations
only.
2 / 3 : [Press] Searches for stations
automatically.
[Hold] Searches for stations manually.
Changing the display information
Frequency
*
"No Text" appears when no text
is received.
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UCA and CNPJVC1
] Select a channel to listen.
Holding the button changes the channels
rapidly.
While searching, invalid and unsubscribed
channels are skipped.
XM: If you do not select a channel within
15 seconds, category selected in step Ÿ is
canceled. You can select all channels of all
categories now (including non-categorised
channels).
Text *
Continued...
ENGLISH 23