Error Message - Panasonic AJ-YBX200G Instrucciones De Funcionamiento

Error message

When this product is equipped with the AJ-HPM100, the following error message is added.
Error
Number Message
E-39
CONFIG
ERROR
Instructions for use
Input and output with IEEE 1394 cannot be performed during playback and recording of the AVC-
Intra.
Clips played at 23.98P or 29.97P frame rate recorded with the camera recorder are pulled down to
1080/59.94i or 720/59.94P for output. Clips played at 25P frame rate recorded with the camera
recorder are pulled down to 1080/50i or 720/50P for output.
Text memos of clips that cannot be played, such as those with a different system frequency, cannot
be displayed as thumbnails.
Specifications
AVC-Intra Codec Board
Dimensions (W a H a D):
115 mm a 84 mm a 13 mm
(4-9/16 inches a 3-5/16 inches a
12-1/2 inches)
(excluding bracket and heat sinks)
Weight :
80 g (0.18 lb)
(excluding bracket and heat sinks)
VIDEO
Video recording formats :
AVC-Intra100, AVC-Intra50
Frequency range:
Y: 74.1758 MHz (59.94 Hz)
P /P : 37.0879 MHz (59.94 Hz)
B R
Y: 74.25 MHz (50 Hz)
P /P : 37.175 MHz (50 Hz)
B R
Quantization:
10 bits
Compression technology :
H.264/AVC intra profile
Displayed when the AVC-I optional board cannot be initialized.
Because failure of the optional board is possible, contact the
store where you purchased it.
Details
Weight and dimentions
approximately. Specifications are subject to
change without notice.
Operation
The AJ-HPM100 stops
working.
when shown are
E-8