Testing; Using The Product - Toto TES100DA Manual De Instalación Y Del Propietario

After installation is complete, confirm
that the dispenser is working properly
using the following method.
1. Place your hands under the spout
and hold them in place until soap
is discharged.
NOTE: Make sure there is no soap
leaking from the tube and connections.
Place hands under spout.
● Proper amount of soap is dispensed
automatically.
Caution: Please do not obstruct the
spout opening.
The soap might go flying off
in an unexpected direction.
Caution: Please do not put liquid soap
on the spout. If the sensor
gets dirty, it could cause malfunction.
Sensor sensing range is
5-7/8"±5/8"(150mm±15mm).

TESTING

USING THE PRODUCT

10
Sensor
window
5-7/8"±5/8"
150±15mm