Toto TES100DA Manual De Instalación Y Del Propietario página 9

4. Connect the tube to pump.
(Insert the barb into the tube fully)
NOTE: Make sure the length of the
tube prevents the bottom of
pump from contacting the
floor when the tank is
removed for refilling.
5. Mount the tank to the controller.
INSTALLATION PROCEDURE - Connection to Power Supply
[AC Type]
1. Connect AC adapter cable to controller.
2. Plug the AC adapter into an (appropriate) outlet.
3. Close the cover.
Tube
Tube
Pump
Tank
8
Cover
AC adapter cable