To Return To Level 1; Level 2 Operator Parameters - ero electronic ELK Guía Del Usario

4. Operator Level 2
Level 2 provides access to additional parameters. It is
protected by a security code.
4.1. To Enter Level 2
1. From any display press and hold
2. After a few seconds the
display will show:-
.
3. Release
(If no button is pressed for 45 seconds the
display returns to the HOME display)
▲
▼
4. Press or
choose Lev 2 (Level 2)
After 2 seconds you will see →
5.
▲
▼
6. Press or
pass code. Default = '2'
7. If an incorrect code is entered the controller
reverts to Level 1.
32
→
to
to enter the
→

4.2. To Return to Level 1

1. Press and hold
▼
to select LEv 1
2. Press
The controller will return to the level 1 HOME
display. Note: A pass code is not required when
going from a higher level to a lower level.
4.2.1.

Level 2 Operator Parameters

Press to step through the list of parameters. The
mnemonic of the parameter is shown in the lower
display. After five seconds a scrolling text
description of the parameter appears.
The value of the parameter is shown in the upper
▲
display. Press or
key is pressed for 30 seconds the controller returns to
the HOME display
Backscroll is achieved when you are in this list by
▲
pressing while holding down
Part number HA028438. Issue 3.0.
▼
to adjust this value. If no
.
Oct-05