Timer Operation - ero electronic ELK Guía Del Usario

4.4. Timer Operation

An internal timer can be configured to operate in one of three different modes. The mode is configured in Level 2
by the 'TM.CFG' (timer configuration) parameter. Each Timing Mode is described in the pages that follow.
Operation
To Run the timer
To Hold the timer
To Reset the timer
The timer can also be RUN, HELD or RESET by the parameter 'T.STAT' (Timer status). It can also be controlled
via digital inputs (if configured).
Part number HA028438. Issue 3.0.
Action
Press and quickly release
▲
▼ +
Press and quickly release
▲
▼ +
▲
▼
+
Press and hold
for more than 1 second
Timer has timed out (END
state)
Oct-05
Indication
Beacon -- RUN = On
Scrolling text display:- TIMER RUNNING
Beacon -- RUN = Flashing
Scrolling text display:- TIMER HOLD
Beacon -- RUN = Off
If the timer is a Dwell Type and configured to turn power
off at the end of the timing period OFF will be displayed
Beacon -- RUN = Off
Scrolling display:- TIMER END.
Note:- The timer can be re-run from the end state without
the need to reset it.
SPX = On if End Type = SP2
41