Makita 3706 Manual De Instrucciones página 7

Insert the end of the knob into the center of the circle to
be cut, and proceed to cut in a clockwise direction.
1
001635
Vacuum cover
Cleaner operations can be performed by connecting the
cutout tool to Makita vacuum cleaner or dust collector.
Installing vacuum cover
1
2
001636
Loosen the thumb screw and remove the shoe. Attach
the vacuum cover, and fasten it securely using the thumb
screw.
Installing vacuum cover with circular guide
1
2
3
001637
Release the thumb screw which serves to secure the
vacuum cover. Align the projections in the circular guide
with the grooves in the vacuum cover, and secure the
vacuum cover and circular guide using the thumb screw.
To adjust the cutting depth, proceed first by loosening the
thumb screw and then by sliding the vacuum cover and
circular guide together. After completion of the
adjustment, tighten the thumb screw securely.
1. Knob
1. Thumb screw
2. Vacuum cover
1. Circular guide
2. Projections
3. Vacuum cover
7
1
4
5
2
3
001638
Connecting to Makita vacuum cleaner or dust
collector
001639
Connect the hose of a vacuum cleaner/dust collector to
the dust nozzle. When connecting to Makita vacuum
cleaner, an optional hose 28 mm (1-1/8") in inner
diameter is necessary.
When connecting to Makita dust collector, connect the
hose for the dust collector directly to the dust nozzle.
1
2
3
001640
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
1. Circular guide
2. Thumb screw
3. Vacuum cover
4. Loosen
5. Tighten
1
1. Vacuum cover
2. Hose 28
3. Hose for
2
vacuum cleaner
3
1. Vacuum cover
2. Hose 28
3. Dust collector