Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEp 8
TOP HANDRAIL
PACKAGING PLASTIC
WAVY WASHER (J)
RIGHT PEDAL ARM
CRANK
WASHER (D)
CRANK CAP
BOLT (C)
WASHER (D)
BOLT (C)
SWING CAP
AXLE
LINK ARM
RIGHT SWING ARM
HARdWARE fOR STEp 8:
BOLT (C)
16 mm
Qty: 6
WAVY WASHER (J)
29 mm
Qty: 2
A
Lay waste packaging plastic over the base rail.
This will prevent the pedal arm assembly from
scratching the elliptical's paint.
B
Open hardware for step 8.
Attach right swing arm to top
C
handrail using 2 swing Caps, 2 bolts
(C), 2 axles and 2 washers (d).
NOTE: Leave bolts loose until you have
finished STEP D.
D
Attach the right pedal arm to the right
Crank using 1 wavy washer (J), 1
washer (d) and 1 bolt (C).
E
Attach the Crank Cap to the Crank.
F
Repeat on opposite side.
WASHER (D)
25 mm
Qty: 6
AXLE
Qty: 2
17
Publicidad
Tabla de contenido
