Assembly Step - Ultrasport F-BIKE 200B Manual De Uso

ASSEMBLY STEP

Step 1
• Pull the safety-pin (19) as shown in
the picture; insert the safety-pin (19)
after completely opening the F-Bike
200B. Attach front/rear stabilizer (5)
to main frame (1), tighten with 4 sets
of carriage bolt (15), curve washer
(17) and domed nut (16).
Step 2
• The left and right pedal (13/14) are marked "L"
and "R". Connect them to their appropriate Crank
Arm (52/53).
• The right pedal is on the right hand side of the
cycle as you sit on it.
• Note that the right pedal should be
threaded on clockwise and the left pedal on
counterclockwise.
GB
16
17
16
17
5
15
19
www.ultrasport.net
1
19
16
17
5
15
19
19