Manufacturer's Warranty - REMS Helix VE Instrucciones De Servicio

eng
3.4. Low discharge protection
REMS Helix VE is equipped with a low discharge protection. This switches off the drive unit as soon as the
battery needs recharging. In this case remove the battery and charge with the REMS rapid charger.
4. Service
4.1. Maintenance
WARNING
Pull out the mains plug or remove the battery before doing maintenance work!
Keep the power tool clean. Blow out the soiled quick-clamping chuck (1).
Only clean plastic parts (e.g. housing, batteries) with mild soap and a damp cloth. Do not use household
cleaners. These often contain chemicals which can damage the plastic parts. Never use petrol, turpentine,
solvent or similar products for cleaning plastic parts.
Liquids may never be allowed to penetrate inside the power tool. Never immerse the power tool in liquids.
4.2. Inspection/repair
WARNING
Pull out the mains plug or remove the battery before carrying out maintenance or repair work! This
work may only be performed by qualified personnel.
The gear of the REMS Helix VE is maintenance-free.
5. Faults
5.1. Fault:
Drive unit does not start.
Cause: ● Battery flat or defective.
● Defective drive unit.
5.2. Fault:
Drive unit stops during operation.
Cause: ● Drive unit overheated or overloaded.
● Battery flat or defective.
● Torque set too low.
● Defective drive unit.
5.3. Fault: No or low drill thrust.
Cause: ● Blunt drill.
● Wrong speed set.
● Wrong direction of rotation set.
5.4. Fault: Bit slips out of screw head.
Cause:
● Wrong bit inserted.
● Defective bit or screw head.
5.5. Fault: Pipe is not deburred.
Cause:
● Blunt pipe deburrer.
● Wrong speed set.
● Wrong direction of rotation set.
6. Disposal
REMS Helix VE may not be thrown into the domestic waste at the end of use but must be disposed of prop-
erly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the first user. The date of delivery
shall be documented by the submission of the original purchase documents, which must include the date of
purchase and the designation of the product. All functional defects occurring within the warranty period, which
are clearly the consequence of defects in production or materials, will be remedied free of charge. The remedy
of defects shall not extend or renew the warranty period for the product. Damage attributable to natural wear