Service Mode - Zodiac AquaLink TRi Manual De Instalación Y De Uso

system if it is operating or shut down for less than 5 minutes. During this delay, "pool mode" will
display '***', and the "Temp.1" and/or "Temp.2" lines will alternatively display "Auto" and the set
point temperatures.
 The heating system can remain off for several minutes even if the pool water temperature is 1°C
below the active set point (timing).
Zodiac
14 :26
Pool Mode On
Temp1 26°
Temp2 Off
Aux1 Off
Aux2 Off
 More 
3.4.3 Auxiliary settings
AquaLink TRi® is fitted with 3 power relays used to control 3 different items of electric equipment, whether
directly related to the pool or not (see §2.3.4). These 3 items of equipment are named "Auxiliaries" by default,
and are displayed as "Aux1", "Aux2", and "Aux3" on the AquaLink TRi® screen.
A name can be given to each one of these auxiliaries from the "Settings" menu (see procedure §3.5.7).
3.4.4 Manual equipment control
The AquaLink TRi® home screen is simplified to have an overview. The "Equipment" menu is used to see the list of
all items of equipment and their operating status.
This menu can be used to stop or start each item of equipment independently of any possible programmed
"Timers": this is a manual control mode.
An "All Off" mode is also available to turn off all equipment at the same time.
Zodiac
14 :26
Pool Mode On
Temp1 26°
Temp2 Off
Aux1 On
Aux2 Off
 More 
3.4.5 Service mode
This is a "safety" mode that blocks its operating to be able to work on an appliance or troubleshoot it without
risking a function being activated, either because it is programmed, or because the user has activated it remotely
using his/her iAquaLink™ account (Internet or smartphone application).
The different available modes are:
 Auto = normal operating mode, the settings and "Timers" are active.
 Service = safety mode, all the settings and "Timers" are deactivated. This mode remains active as long as the
"Auto" mode is not reactivated.
 Timed = safety mode equivalent to the "Service" mode but limited to 3 hours.
If a user attempts remote operations when the AquaLink TRi® is in "Service Mode" or "Timed", a message
will be displayed on his/her iAquaLink™ interface to indicate that all actions are impossible because the
"Service Mode" or "Timed" mode is activated.
H0369400.B.EN – 2013/03
Warning :
Pump will
remain on
during
cooldown
Zodiac
14 :26
Settings >
Devices >
Service Mode >
 More 
Zodiac
14 :26
Pool Mode ***
Temp1 Auto
Temp2 Auto
Aux1 Off
Aux2 Off
 More 
DEVICES
14 :26
Filter Pump On
Temp1 26°
Temp2 Off
Aux1 On
Aux2 Off
Aux3 Off
All Off
13