Tightness Inspection; Hoses Check; Disposing Of The Vacuum Cleaner - Nilfisk VHC110 Manual De Instrucciones

VHC110 - VHC120

Tightness inspection

Hoses check

Make sure that connecting hoses (1) are in a good condition
and correctly fixed.
If the hoses are damaged, broken or badly connected to the
unions, they must be replaced.
When sticky materials are treated, check for possible clogging
along the hose, in the inlet and on the baffle plate inside the
filtering chamber.
To clean, scrape the inlet (2) from the outside to remove
deposits.
Filtering chamber gasket check
Make sure that the container (2) is tight with the filter chamber
(3).
Replace the dust container gasket (1) or the liquid container
gasket (4) if it is not tight, or if it is torn, cut, etc.
I
GB
E
E
C447
Figure 12
Figure 14

Disposing of the vacuum cleaner

Dispose of the vacuum cleaner in compliance with the laws in
force.
■ Proper disposal (Applicable in the European Union
and in countries providing a separate collection
system)
The symbol (Fig. 13), which is present on the product or in its
documentation, indicates that the product cannot be disposed
of together with other domestic waste at the end of its life
cycle.
To prevent damage to the environment or health caused by
improper waste disposal, please separate this product from
other waste and recycle it responsibly in order to support the
sustainable reutilisation of material resources.
This product cannot be disposed of together with other
commercial waste.
14
Figure 13
12/2017