Elvox Digibus 6614 Instrucciones De Funcionamiento página 4

PUSH-BUTTONS AND ADJUSTMENTS
A) 3,5'' LCD screen
B) Microphone
C) Loudspeaker
D1 – D2) Pair of push-buttons "
for:Choice of the ring tone / lighting adju-
.
stment.
With monitor off.
Press the D1 or D2 push-button for at
least 5 seconds to choose the ring tone for
the entrance panel call. Since the first ring
tone starts ringing you can scroll all the ring
tones by repeatedly pressing the D1 or D2
.
push-button.
With monitor off.
To choose the ring tone for the outdoor
call, press for at least 5 seconds the D1
and D2 push-buttons simultaneously until
the red led "M" lights up with intermittent
light.
Press then the D1 or D2 push-button to
.
choose the ring tone.
With monitor lit.
You can adjust the lighting by pressing
the D1 or D2 push-button.
E1 – E2) Pair of push-buttons "
For chime volume / contrast adjustment /
.
audio volume adjustment.
With monitor off.
To adjust the chime volume press the E1
or E2 push-button for at least 5 seconds
until the first chime starts ringing.
Increase or decrease the volume by pres-
sing the E1 or E2
chime exclusion may be obtained by
pressing the E2 push-button repeatedly
.
until the "M" red Led lights up.
With monitor on.
By pressing the E1 or E2 push-button you
.
can adjust the contrast.
With monitor on.
During a conversation between monitor
and entrance panel adjust the audio volu-
me by pressing the E1 or E2 push-button
simultaneously with the push-button
" ".
F) Push-button "
G) Push-button "
ard (if installed) or lock release when the
monitor is called.
":
push-button. The
": function F1
": Call to the switchbo-
GB
H) Push-button "
(if connected to the installation).
"
I) Push-button "
the call and/or switch-on of the monitor,
hold the push-button down for conver-
sation with the speech unit.
L) " " Open door sign.
The switching on of the sign (green
LED) indicate that the door is open (the
function is optional in relation to the
type of installation).
M) " " Sign for the "chime exclusion
1) Outdoor lock push-button
if installed
2) Function push-button F2
(if connected to the installation)
3) Function push-button F6
(if connected to the installation)
4) Function push-button F7
(if connected to the installation)
5) Function push-button F8
(if connected to the installation)
6) Function push-button F9
(if connected to the installation)
NOTES FOR USER:
- Do not open or tamper with the set.
- In case of failure, modification or mainte-
nance of the units (power supply, etc.)
contact only specialized technicians.
- Maximum operating temperature: 40°
- Do not expose the appliance to dripping,
sprinklings of water and do not put any
object filled with water on it. Do not
obstruct the ventilation openings.
- Warning: to avoid hurting oneself, this
appliance must be fixed to the wall accord-
ing to the installation instructions.
": Function F3, F4, F5
": "Talk/Listen". After