Caring For Your Meter - BIONIME GM550 Manual Del Usuario

Recalling Test Result and Average
4. Quick Searching: If you want to see all values automatically displayed in sequence, first enter the memory mode. Then
keep pressing the right or left button for 2 seconds. (right button is for searching the tests the latest value to the oldest
one; by using the left button you can scroll from the oldest to the latest one). Anytime you want to stop just release the
pressed button. It will stop and display the current displayed value. You can use this way to find a particular reading you
want to check.
5. Reading right after test: If you just finish the test, press the main button to enter the MEM (memory) screen and review
the latest test result.
NOTE
Your Control Solution results will be automatically non-averaged without selecting, but still can be recalled. The
Control Solution Test results will show with "CS" symbol under memory screen.
PRECAUTION
- You have to set the time and date to activate the average function.
- The " " , " " results, the Control Solution results and the test result made out of normal temperature range
<50℉ (10℃) >104℉(40℃) , are not calculated in the average.
42
Maintenance
®
Keep your Rightest Blood Glucose Meter GM550 and Test Strip GS550 free of dust, water or any other liquid. Store the
meter in the carrying case when not in use. If meter is dropped or damaged, perform a quality control test with the control
solution before doing a blood glucose test.
Cleaning Meter
®
Clean the outside of the Rightest Blood Glucose Meter GM550 with a damp cloth and mild soap/detergent. Keep the
test strip port from getting wet.
Cleaning Test Strip Port
If your Test Strip Port is stained with blood, control solution or any liquid, please use a dry tissue or alcohol swab to clean it
up immediately. Do not use any thing wet to clean it. Perform a quality control test to ensure the Rightest
Meter GM550 is working properly.

Caring for Your Meter

®
Blood Glucose
43