Overview Of Versions; Gpc-Bv (Basic Version); Gpc-Tl (Top Loader); Gpc-E (Extreme) - Aventics GPC Serie Instrucciones De Servicio

Cilindro de guía
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 133
42
AVENTICS | GPC | R402003957–BDL–001–AB
Device description
5.1

Overview of versions

Refer to the product catalogue for available versions, piston sizes
and stroke lengths.

5.1.1 GPC-BV (Basic Version)

GPC-BV is used where high precision is required, for lateral loads
or for handling high torque. Available with slide bearings or ball
bearings and piston sizes from
00129058
stroke lengths up to 200 mm.

5.1.2 GPC-TL (Top Loader)

GPC-TL is based on GPC-BV but with an extra mounting base on
the upper side of the front plate for easier mounting of optional
equipment. Available with slide bearings or ball bearings with piston
00129059
sizes
12,

5.1.3 GPC-E (Extreme)

GPC-E is used when the stroke length needs to be finely adjusted.
GPC-E has one shock absorber fitted as standard for adjustment of
the outgoing movement and can be fitted with stroke length
00129060
adjustment and a shock absorber also for the return stroke.
Available with slide bearings or ball bearings with piston sizes
16 and

5.1.4 GPC-ST (Slide Table)

GPC-ST is a version of the GPC cylinder where the cylinder body
moves and the end plates are fixed to the machine stand.
GPC-ST has stroke length adjustment in both directions with a
00129061
shock absorber in each end as standard. Available with ball
bearings with piston sizes
to 150 mm.
16 and
20 mm and stroke lengths up to 100 mm.
20 mm and stroke lengths up to 150 mm.
12, and
10 mm up to
100 mm and
20 mm and stroke lengths up
12,

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gpc-bvGpc-tlGpc-eGpc-st

Tabla de contenido