Product Description And Specifications; Intended Use; Product Features - Bosch GCM 12 GDL Professional Manual Original

OBJ_BUCH-1360-005.book Page 35 Wednesday, December 21, 2016 1:10 PM
Symbols and their meaning
Indicates the individual steps for adjusting the bevel angle.
1. Loosen lock lever
2. Tilt the glide arm lightly leftward
3. Set the desired bevel angle range on the rotary knob
Setting bevel angle ranges on the rotary knob
Saw blade is inclined to the left (45° to 0°)
Saw blade is inclined to the right (0° to 45°)
Total tilting range of the glide arm (–47° to +47°)
For adjustment of random mitre angles, the saw table must
move freely and the mitre detent override must be blocked:
– Pull lever  and at the same time push the mitre detent
override  downward at the front.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
Bosch Power Tools
When using appropriate saw blades, sawing aluminium
profiles and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Extraction adapter
3 Laser warning label
4 Handle
5 Locking lever
6 Blade guard
7 Transport handle
8 Retracting blade guard
9 Fence extension
10 Fence
11 Saw-table extension
12 Mounting holes
13 Insert plate
14 Mitre detent override
15 Locking knob for various mitre angles
16 Mitre detent lever
17 Bevel lock lever
18 Detents for standard mitre angles
19 Recessed handles
20 Hex key (6 mm/4 mm)
21 Hex key (2 mm)
22 Material clamp
23 Roller
24 Right bevel angle indicator (0° to 47°)
25 Chip deflector
26 Glide mechanism lock lever
27 Laser protection cap
28 Glide arm
29 Adjusting screw of depth stop
30 Depth stop
31 Transport safety-lock
32 Scale for bevel angle
33 Left bevel angle indicator (47° to 0°)
34 Adjustment knob for 22.5° bevel angle
35 Lock screw of the material stop
36 Material stop
37 Scale for mitre angle
38 Saw table
39 Rotary knob for adjustment of the bevel angle range
40 Saw blade
41 Chip ejector
42 Locking screw of linkage 43
43 Linkage of the retracting blade guard
44 Front fastening screw
(cover plate/retracting blade guard)
English | 35
1 609 92A 2P3 | (21.12.16)