Fora D15 Manual De Usuario página 26

• Contact bars must be inserted all the way into the monitor or you may
receive an inaccurate test result.
• Every time you perform a control solution test, you must enter into the
"CTL" test mode so that the test result will not be stored in the monitor
memory. Failure to do so will cause confusion between the glucose test
result and the control solution test result in system memory.
26
NOTE
Step3 Obtain control solution.
Shake the control solution vial well.
Remove the
solution bottle and place it on a flat surface.
Squeeze the vial, discard the first drop,
and wipe off the dispenser tip to prevent
contamination. Squeeze the vial again
to produce another drop and place this
drop on the top of cap.
cap from the control