Fora D15 Manual De Usuario página 48

After measurement is finished the monitor will automatically switch
to the transmission mode within one minute. After transmission is
completed, the monitor will automatically turn off.
Method two:
Use the interface cable to transmit results after measuring.
When the meter is off, connect both ends of the RS232 interface
cable to the data port of FORA D15f and RS232 port of FORA Tele-
health respectively. Press S button, PCL will appear on the display
to indicate the monitor is switched to the transmission mode. After
transmission is completed, the monitor will automatically turn off.
Step1
Step2
The S button of FORA D15f has two functions. When you press the S
button for one second, PCL will appear on the display and the monitor is
switched to the transmission mode. When you press and hold the S button
for 5 seconds, the monitor will switch to the setting mode. In the setting
mode, only date and time can be changed.
48
INTERNET
NOTE
FORA
Telehealth
System