Irritrol KD2 Guia Del Usuario página 5

1 - LCD Display
2 - Control Dial - Select controller programming and
operating functions.
Control Dial Positions:
HOME - Automatic operation position.
Date/Time
- Set the current date and time.
Station Times - Set station run time duration.
Start Times
- Set start times(s) for automatic watering
program.
Water Days - Select individual days of the week for
automatic watering.
Interval
- Set a Day Interval watering schedule.
Odd/Even - Set an Odd or Even watering day (date)
schedule.
Special Functions - Select optional controller
functions.
Manual Programs - Select watering programs for
manual operation.
Manual Station(s) - Select station(s) for manual
operation.
Test - Run a test program to check station operation.
3 -
and Buttons - Increase or decrease parameter
values and various manual functions.
4 -
Button - Select program A, B or C.
5 -
Button - Advance to next item or activate function.
6 - Button - Press to turn off / delay operation. Press
again to resume operation.
7 - RJ 45 Connector - Connect applicable Irritrol controller
accessories such as Climate Logic
8 - Station Terminals - Connection terminals for valve control
wires, master valve or pump start relay wires.
9 - Sensor Connection Terminals - Connect applicable
Irritrol controller accessories such as Rain Sensor.
.
TM
10 - 9-Volt Battery Connector - Connect a 9 -Volt battery
to display the time and date during power outage.
Programs can also be edited while on battery power but
valves will not be activated .
11 -
Internally Mounted Transformer - Supplies 24VAC
power to the controller from a grounded wall plug outlet.
12 -
Power Supply Cover
13 -
Internal Components Cover
14 -
Station Numbers - Displayed when setting program start
time(s) and while a station is running.
15 - Symbol - Indicates that the selected menu has
additional available options.
16 - Symbol - Indicates that the rain sensor is bypassed.
17 - Symbol - Displayed when program is set to Day
Interval schedule. The symbol is shown when a language
other than English is selected.
18 -
Symbol - Displayed when watering is set. The
symbol indicates that scheduled watering is not set.
Flashing watering symbol indicates that the controller is
actively watering.
19 -
Symbol - Displayed when setting an automatic
watering program start time.
20 -
Main Display - Shows various time values and controller
information.
21 -
A B C - Program letter identifiers. Displayed during
programming and operation.
Note:
Actively watering program will be flashing and
programs that will water at a later time are shown as
solid.
22 - %
Symbol - Displayed when a Watering Budget
adjustment is in use.
23 -
Symbol - Displayed when setting the station run time
duration.
3