General Oven Information - Fulgor Milano Sofia Manual De Uso Y Cuidado

7 - General Oven Information

EN
Before using your oven for the first time remove all packing and
foreign materials from the oven(s). Any material of this sort left
inside may melt or burn when the appliance is used.
Heat the empty appliance to the maximum temperature in
order to remove any manufacturing residues which could affect
the food with unpleasant odors.
Flashing Symbols or Numbers
Signals an incomplete action that is in progress (locking the
door, preheat, etc.) or an incomplete setting that calls for
another input.
Beeps
Signals that more information must be entered or confirms the
receipt of an entry. Beeps also signal the end of a function or
an oven fault.
Door lock
It's displayed steadily when the door is locked. The symbol
flashes when the latch is moving in order to lock or unlock the
door. Do not attempt to open the door at this time. Door can be
opened when the symbol no longer appears. "AUTO LOCK"
appears when the door has been locked automatically due to
self-clean mode.
"USER LOCK" is displayed when the door has been locked
manually by the user, for example to prevent children from
having free access to the oven cavity. Hold both the
- keys for 3 seconds. The latch will lock the door. Repeat the
same operation to unlock.
Locking the keyboard
Hold both the keys indicated by "KEYBD. LOCK" legend for 3
seconds. Commands are now locked and "SENS LOCK" will
be displayed every time you touch any keys. Repeat the same
operation for 3 seconds to unlock the keyboard.
Power Failure
After the power returns to the oven, the clock displays the time
12.00 AM .
Default Settings
The cooking modes automatically select a suitable temperature
when the selector is in the preset position. These can be
changed when a different one is needed. It's also possible to
set a user option in order to save the last used temperature per
every cooking mode.
Failure Number Codes
These codes are displayed when the electronic control detects
a problem in the oven or in the electronics.
8
Convection Fan
The convection fan operates during any convection mode.
When the oven is operating in the convection mode, the
fan will turn off automatically when the door is opened. The
convection fan always runs during the preheat time.
Component Cooling Fan
Activates during any cooking or self-cleaning mode to cool
inner components and outer door surfaces. This air is exhausted
through the vent located above the oven door. It continues to
run until components have cooled sufficiently. The cooling ffan
operates at double speed (or RPM's) in self-clean and whenever
the internal components temperature becomes high.
Preheat and Fast Preheat
Whenever a cooking mode is set and the oven is heating,
the "PREHEAT" writing appears in the temperature display: the
vertical bar indicates, in four steps, when the oven reaches the
25%, 50%, 75%, 100% of the set-point temperature.
As soon as the 100% is reached, the control sounds an "end of
preheat" tone and the "PREHEAT" writing disappears.
When it's necessary to heat up the oven rapidly, a Fast
Preheat mode is available: it uses the heating elements and the
convection fan in a special way, in order to reduce the heating
time as long as possible.
After having set one of the cooking functions for which the fast
preheat is available, touch the
is shown in addition to the "PREHEAT" one.
+
and
As soon as the set-point temperature is reached, the control
sounds an "end of preheat" tone and both "FAST" and
"PREHEAT" writings disappear. The oven switches automatically
to the desired cooking mode that was previously set: put the
food inside now.
P-HEAT key, the "FAST" writing