• In double oven models, both ovens can be set independently
to operate a timed mode.
• Be sure that the time-of-day clock is displaying the correct
time.
• The timed mode turns off the oven at the end of the cook
time.
To Set a Timed Mode
1. Select the oven by means of [UPPER/LOWER] key, if
necessary.
2. Select the cooking mode and the temperature by means of
the knobs. The "ON" writing will appear in the display.
3. Touch
TIME
key until the "TIME" writings will appear in the
display.
+
4. Touch
or
-
, the hour digits will begin flashing.
Continue to set the desired cooking time. Keep in mind that
the time required for the oven to reach the temperature must
be included in the set cooking time.
5. Touch
TIME
again, the hours will be confirmed and the
minute digits will begin flashing.
+
-
6. Touch
or
to change the minutes. Hold the key to
change by 10 minutes steps. Continue to set the desired
cooking time.
7. Touch
TIME
once again or wait for a few seconds to confirm
the cooking time value.
To Delay the Start of a Timed Mode
Follow steps 1 through 6 or 7 above.
• Touch
TIME
key until "STOP TIME" will appear in the display.
• The control automatically calculates and displays the initial
value, adding the cooking time already set to the time of day.
11 - Timed Oven Mode Operation
+
Touch
or
-
, the hour digits will begin flashing. Continue
to set the desired stop time.
• Touch
again, the hours will be confirmed and the
TIME
minute digits will begin flashing.
+
-
• Touch
or
to change the minutes. Hold the key to
change by 10 minutes steps. Continue to set the desired stop
time.
• Touch
TIME
once again or wait for a few seconds to confirm
the stop time value.
• The clock automatically calculates the time of day at which
the mode starts and stops. The "DELAY" writing is displayed
until the starting time is reached.
When a Timed Mode is running
• As soon as the oven actually starts cooking, the display
shows the cooking time and counts down by one minute
steps. The oven will cook for the programmed time.
• When the time expires, the oven automatically turns off, the
writings "ON" and "TIME" start flashing and an "end of
activity" beep sequence sounds. Reminder beeps will sound
for up to fifteen minutes until any key is touched in order to
recall the user attention.
How to check a time value
• Whenever it's necessary to check a time value that is not
displayed, touch the
TIME
displayed to view the desired value for 5 seconds.
• Example: if the timer value is displayed and you want to
check the cooking time, touch the
displayed to view the cooking time for 5 seconds.
key until the proper writing is
TIME
key until "TIME" is
EN
13