Putting Out Of Operation - Rothenberger ROWELD P 250/8 B Instrucciones De Uso

 Put the heating element back in the storage case.
 The welding process is ended after the cooling down time has expired, is stored, a signal
sounds and the pressure is dissipated automatically.
 Conclude with use of the welding menu by pressing OK.
 Dissipate the pressure completely by pressing the button (3).
 Unclamp the welded work pieces and remove them.
 Move the basic machine apart. The machine is ready for the next welding cycle.
Transferring the log:
In the Log menu item, these can be saved with OK, if a USB stick is connected. The window then
closes automatically.
This report file should be processed using the ROTHENBERGER Dataline 2 software and a
computer.
All welding parameters can be found in the enclosed welding tables.
3.2.5

Putting out of operation

 Use the button (6) to turn off the hydraulic unit.
Let the heating element cool or stow it in such a way that no adjacent materials
can be ignited!
 Remove trimmer unit, heating plate and hydraulic unit mains plugs from power outlet and roll
up cables.
Transport and set the hydraulic unit only in a horizontal position. If it is set at an
angle, oil escapes from the vented plugs with the dipstick!
 Disconnect and roll up hydraulic hoses.
Important! Protect couplings from damage and dirt!
48 ENGLISH