Handling Errors And Problems; Error Messages - Omron M1 Plus Manual De Instrucciones

HEM-4011C.book Page 27 Tuesday, August 9, 2005 10:35 AM

5. Handling Errors and Problems

5.1

Error Messages

Error Display
Blinks or appears
continuously
Cause
Cuff is under inflated.
Movement during
measurement
Air tube disconnected.
Arm cuff not applied
correctly.
Clothing is interfering
with the arm cuff.
Air is leaking from the
arm cuff.
The arm cuff was inflated
above 299 mmHg.
Battery power is low.
5.Handling Errors and Problems
Remedy
Press air release button and
restart the measurement with a
higher inflation level. Carefully
read steps under section 3.3.
Repeat measurement. Remain
still and do not talk during
measurement.
Refer to section 3.3.
Insert the air tube securely.
Refer to section 3.2.
Apply the arm cuff correctly.
Refer to section 3.2.
Remove any clothing interfering
with the arm cuff.
Refer to section 3.2.
Replace cuff with new one.
Refer to Chapter 7.
Release your hand from the air
inflation bulb before the pressure
reaches 299 mmHg.
Refer to section 3.3.
Replace all four "AAA" batteries
with new ones.
Refer to section 2.1.
EN
27