Before Use; Inserting/Charging The Battery; Inserting The Battery - FujiFilm INSTAX SHARE SP-3 Manual De Instrucciones

Before Use

• Before using the printer, install the instax SHARE application on your device.
• When you are using an Android OS device, search for "instax SHARE" in the Google Play, then install the application.
* System requirements of an Android OS device: Android Ver 4.0.3 or later and Google Play are installed.
• When you are using an iOS device, search for "instax SHARE" in the App Store, then install the application.
* System requirements of an iOS device: iOS Ver 8.0 or later is installed.
You may not be able to print from some devices even if you have installed the instax SHARE application and your
device meets the requirements listed here.
• The battery is not fully charged at shipment. Be sure to charge it before using the printer.
Access instax SHARE website for the latest information on system requirements.

Inserting/Charging the Battery

Inserting the Battery

~
Pull down the battery cover lock
to open the battery cover.
instax_BO-C_6lang.indb 5 instax_BO-C_6lang.indb 5
Ÿ
Insert the battery according to the arrow on
it. Make sure the yellow line on the battery
aligns with the mark on the printer.
!
Align the tabs on the battery cover
and push the battery cover lock
until it clicks into place.
2017/9/14 15:21:10 2017/9/14 15:21:10
EN
5