Contents; Safety Instructions - ALFRA TML 200 R Manual De Instrucciones

EN
Dear customer,
Thank you for purchasing an ALFRA product. Please read these operation instructions closely before using
your device for the first time and keep them along with the enclosed Product Control Card for later reference.

SAFETY INSTRUCTIONS

Dangers can occur when transporting loads by lifting devices due to improper handling and/or poor
maintenance, which may cause serious accidents with fatal physical injuries. Please read these operation
instructions closely and observe all safety instructions mentioned therein. Contact the manufacturer if you
have any questions.
!
Always...
activate the lifting magnet completely
activate the lifting magnet on metallic,
ferromagnetic materials
use the entire magnetic surface for lifting
lift on plane surfaces
lift round pipes with the correct diameter
ensure that the pipe is positioned correctly in
the groove when using the lifting magnet on
round pipes
check the magnetic holding force by lifting
the load slightly by about 10 cm
clean the magnetic surface and keep it clear
of dirt, chips and welding sputter
set the lifting magnet down gently to prevent
damage to the magnetic surface
check the hazard area before pivoting the load
respect the stated maximum load before pivoting
inspect the magnetic surface and the entire
lifting magnet for damage
usesuitableliftinggear
follow the instructions in these operating
instructions
instruct new operators to the safe use of
lifting magnets
respect local, country-specificguidelines
store in a dry place
People using pacemakers or other medical devices should not use this lifting magnet until
they have consulted with their physician.
14
!
Never...
exceed the stated maximum load
lift arched objects or objects with free form
surfaces
lift round pipes of a too big or too small diameter
lift loadsoverpeople
lift more than one work piece at a time
switch the lifting magnet off before setting
down the load safely
allow the load to sway or bring to a sharp and
immediate stop
lift loads exceeding the recommended
dimensions
lift loads with cavities, cut-out openings
or drilled holes
liftunbalancedloads
modify the lifting magnet or remove
operating labels
use the lifting magnet if damaged or
missing parts
strain the underside of the magnet through
heavy impact or blows
position yourself beneath the lifted load
lift loads while people are within the hazard area
leave the load hanging unattended
use the lifting magnet without having been
properly instructed
use if you have not read and understood these
operating instructions completely
use the lifting magnet to support, lift or
transport persons
operate the lifting magnet in temperatures
higher than 60°C (140°F)
expose to corrosive substances