ALFRA TML 200 R Manual De Instrucciones página 19

Example:
You would like to lift a plateof S235 which is 6 mm thick. The plate stands vertically in your shelf
(i.e. at an angle of 90°) and your magnet is ideally positioned, as shown in figure 1.
Material thickness: 6 mm
Material: S235
Alignment of the load: 90° tilted; load swivel facing upwards
Maximum load weight with 3:1 safety factor = 165 kg x 100 % x 30 % = 49.5 kg
max. load-bearing capacity at 0° = 165 kg (see table 2)
holding force, subject to material = 100 % (see table 1)
Load-figure corresponding to direction = 30 %
19