Specific Safety Rules - Milwaukee 0613-20 Manual Del Operador

1. Maintain labels and nameplates. These carry important information. If unreadable
or missing, contact a MILWAUKEE service facility for a free replacement.
2. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
3. Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring. Contact with a "live" wire
will make exposed metal parts of the tool "live" and shock the operator.
4. Keep hands away from all cutting edges and moving parts.
5. Wear ear protectors when using the tool for extended periods. Prolonged
exposure to high intensity noise can cause hearing loss.

SPECIFIC SAFETY RULES

Properly Recycle Nickel Cadmium Batteries
Direct Current
Underwriters Laboratories, Inc.
No Load Revolutions per Minute (RPM)
Specifications
Cat. No. Volts DC
0613-20 14.4
0614-20 14.4
0616-20 14.4
0622-20 18
0624-20 18
Symbology
No Load RPM
Low 0-500
High 0-1700
Low 0-500
High 0-1700
Low 0-500
High 0-1700
Low 0-500
High 0-1700
Low 0-500
High 0-1700
4
No Load Blows
per Minute
Low 0-7500
High 0-25500
Low 0-7500
High 0-25500
N/A
N/A
Low 0-7500
High 0-25500