Pin Assignment - Sony HR Trinitron PVM-8045Q Manual De Instrucciones

Specifications
Transport and storage conditions
Temperature –10 to +40°C (14 to 104°F)
Humidity 0 to 90%
Pressure 700 to 1060 hPa
Dimensions Approx. 217 x 217 x 352.5 mm
(w/h/d) (8
not incl. projecting parts and
controls
Mass Approx. 8.2 kg (18 lb 1 oz) not
incl. battery packs
Accessory supplied AC power cord (1)
Cable with an 8-pin connector (1)
(PVM-8045Q/8042Q only)
AC plug holders (1 set)
Tally plate (1) (PVM-8045Q/
8042Q only)
Design and specifications are subject to change
without notice.
12
(US)
× 8 × 14 inches)
5 / 5 /
8 8

Pin Assignment

Y/C IN connector (4-pin mini DIN)
4
Pin No. Signal
1 Y-input
2 CHROMA
sub-carrier-input Delay time between Y and
3 GND for Y-input
4 GND for
CHROMA-input
REMOTE connector (8-pin mini DIN)
(PVM-8045Q/8042Q only)
8
5
Pin No.
1 16:9
2 H/V delay
3 GND
4 EXT SYNC
5 Tally
6 Underscan
7 A/B or RGB/Y R-Y B-Y
8 LINE/RGB
Notes
• For remote control, connect the pin of the desired
function to pin 3 (GND).
• For remote control, set the front button to OFF (the
switch is out).
2 1
3
Description
1 Vp-p, sync negative, 75 ohms
286 mVp-p (NTSC), burst
C: within 0 ±100 nsec., 75 ohms
GND
GND
7 6
4 3
2 1
Signal