Storing The Battery; Handling And Transportation; Assistance And Repairs; Warranty Coverage - Stiga AB 500 Li 48 Manual De Instrucciones

3. clean (par. 7.3);
4. make sure there are no loose or damaged
components. If necessary, replace any
damaged components and tighten
any screws and loose bolts or contact
the authorised service centre;
5. store the machine:
– in a dry place;
– protected from inclement weather;
– in a place out of children's reach;
– making sure that keys or tools used
for maintenance are removed.

8.2 STORING THE BATTERY

The battery must be kept in a cool,
shaded place without humidity.
NOTE If unused for any length of
time, recharge the battery every two
months to prolong its working life.

9. HANDLING AND TRANSPORTATION

Whenever the machine is to be
handled or transported you must:
– stop the machine (par. 6.5);
– remove the battery from its housing
and recharge it (par. 7.2.2);
– only hold the machine using the
handgrips and position the tubes so
that they do not case obstruction.
When transporting the machine
on a vehicle, always:
– remove the tubes;
– fasten the machine securely
with cables or chains;
– position it so that it can not cause
a hazard for anybody.

10. ASSISTANCE AND REPAIRS

This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the warranty and all obligations
and responsibilities of the manufacturer.
• Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
• The Authorised Service Centres only
use genuine spare parts. Genuine
spare parts and attachments have been
designed specifically for machines.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.

11. WARRANTY COVERAGE

The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover damage caused by:
• failure to become familiar with the
documentation accompanying the machine;
• carelessness;
• incorrect or forbidden use or assembly;
• use of non-genuine spare parts;
• use of attachments not supplied or
not approved by the manufacturer.
The warranty does not cover:
• normal wear and tear of
consumable materials;
• normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
EN - 13