Using Your Refrigerator; Setting The Controls - KENMORE ELITE 111.7269 Manual De Uso Y Cuidado

SETTING THE CONTROLS

Temperature Control
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
• The refrigerator temperature control is preset to
37 deg F (3 deg C) and the freezer control is preset
to 0 deg F (-18 deg C). These are recommended
temperature settings for normal use conditions.
Freezer Compartment
Push the Freezer button and the temperature setting
changes in the sequence as shown below:
>>> Sequential Temperature Change <<<
Accela Chill Freezer function:
To activate freezer Accela Chill, press and hold the
Freezer button for 3 seconds. Accela Chill LED will turn
on. Push the button again to cancel.
The Accela Chill function is useful to help quickly chill the
freezer compartment when needed. For example: If a
large quantity of warm food is placed inside the freezer,
or if loading the freezer with new groceries which may
not be as cold as normal freezer temperatures.
Accela Chill will automatically cancel (Accela Chill LED
will turn off) after 50 hours.
Refrigerator Compartment
Push the Refrigerator button and the temperature setting
changes in the sequence as shown below:
>>> Sequential Temperature Change <<<
FDR 30Cuft_UCG(영+스)(Kenmore).indd 21

USING YOUR REFRIGERATOR

Accela Chill Refrigerator function:
To activate refrigerator Accela Chill, press and hold the
Refrigerator button for 3 seconds. Accela Chill LED will
turn on. Push the button again to cancel.
The Accela Chill function is useful to help quickly cool the
refrigerator compartment when needed. For example:
If a large quantity of warm food is placed inside the
refrigerator, or if loading the refrigerator with new
groceries which may not be as cold as normal refrigerator
temperatures.
Accela Chill refrigerator function will automatically cancel
(Accela Chill LED will turn off) after 6 hours
Demo Mode (For Store Use Only)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve energy while on display
in a retail store.
When Demo Mode is active, the icons for the various
refrigerator functions will light up in sequence across the
face of the panel.
To activate:
1. Push and hold Control Lock button for 3 seconds to
2. While pressing and holding the Water Filter and
To deactivate:
1. While pressing and holding the Water Filter and
2. Push and hold Control Lock button for 3 seconds to
21
lock control panel. The Locked icon will appear.
Dispenser Light buttons, press the Refrigerator Temp
button 5 times. Continue to press and hold the Water
Filter and Dispenser Light buttons for 5 more seconds
to start Demo Mode sequence and disable cooling
functions.
Dispenser Light buttons, press the Refrigerator Temp
button 5 times to stop Demo Mode sequence and
enable cooling functions.
unlock control panel. The Locked icon will disappear.
2019-10-14 오전 10:30:22