KENMORE ELITE 111.7269 Manual De Uso Y Cuidado página 32

REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have glass
or wire shelves.
Adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator door is
open which will save energy.
IMPORTANT: Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature changes or impact.
CAUTION : Glass shelves are heavy. Use special care
when removing them.
Adjusting Shelves (Cantilever)
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf: Lift up on front of shelf with one
hand and with other hand push up on back of shelf to
release attachment hooks from attachment slots. Pull
the shelf out.
To reinstall a shelf: With front of shelf angled slightly
up, engage hooks on back of shelf into attachment
slots, and then lower front of shelf into place.
CAUTION : Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
FDR 30Cuft_UCG(영+스)(Kenmore).indd 32
USING YOUR REFRIGERATOR
3
3
Slide Glass Shelf
To create space for tall item storage, grasp edge of front
half of shelf and slide down and under the back half of
shelf.
REMOVABLE CONVENIENCE BINS
Store small amounts of fresh food or leftovers in the two
convenience bins recessed into the front of the refrigerator
compartment.
You can remove the covered bins for use outside of the
refrigerator.
To remove bin :
1. Remove lid to access bin.
2. Lift bin out of its recsssed space.
32
2019-10-14 오전 10:30:24