Mounting The Carrier System - Minnid e.base Instrucciones De Uso

GB
4

Mounting the carrier system

Ø Remove the cover cap from the lock.
1.
2.
Ø Put the key in the lock.
Ø Unlock the lock.
1.
2.
Ø Pull the handle out of the large recess on
the left.
Ø Swivel the handle along the cam disc to the
small recess on the right.
Ø Let go of the handle. The handle is pulled
into the small recess on the right.
1.240.160BA_20191212
Ø Check the marking on the handle.
Ø The marking must indicate "RED".
Ø Push the e.base carrier system onto the
3.
Ø Pull the handle out of the small recess on
Ø Swivel the handle along the cam disc to the
Ø Let go of the handle. The handle is pulled
RED
support arms of the e.hit carrier system as
far as it will go.
3.
2.
the right.
large recess on the left.
into the large recess on the left.
1.
21